Mobile phone measurement and control Mitsubishi PLC

1. Function overview

3.                                                                                                                                                                                                                                                            Moblie phone APP remotely collects and controls Mitsubishi PLC, supports mobile phone remote reading of Mitsubishi PLC's X/Y/M/S/T/C and other registers, can write PLC's Y/M/T and other registers, supports multiple accounts to log in to APP measurement and control PLC               On the basis of this template, you can modify the layout of the monitoring page of the mobile APP, customize the name and logo of the app, etc., to complete your own APP.                                                                                                                                                                                                   2.Second, the system architecture

The mobile phone APP or PC configuration software uses Jiemai Cloud to collect or control the PLC equipment on the remote site,

If it is measurement and control in a non-local area network, the appropriate DTU communication module should be selected according to the on-site PLC network environment:

Local area network: no DTU module required

4G communication: G340N type 4G-DTU is required

Network port communication: CN10 network port DTU is required

WiFi communication: CW10 WiFi-DTU is required       

     3. Real-time data screen

The template predefines a lot of standard graphics, such as pumps, valves, meters, pipes, motors, etc., which can design realistic graphics effects and truly reproduce the production process, which can greatly shorten the development time.

Click the relevant button in the screen to enter the start-stop real-time screen, curve or alarm record page     

  4.Remote device control

When the permission level conditions are met, the mobile APP or PC can set the parameters of the on-site substation equipment, start and stop the equipment, switch and other control operations. 

  5.Real-time curve/historical curve

Multiple acquisition variables can be set to correlate curves, mobile APP or PC terminal can view historical data and trends in any time period through real-time curves and historical curves 

         6.Alarm message push/alarm record

When the status value exceeds the alarm value, the mobile phone APP or PC will generate an alarm event, and the mobile terminal will push the alarm message, or you can check the alarm record table to get all the alarm information